FOR GYPSUM AND CONCRETE WALL TILES
Ready to use, colorless, steam permeable,
water-dilutable preparation for hydrophobic impregnation absorbent construction substrates inside and outside buildings.
Recommended for impregnation of decorative tiles made of plaster and concrete except for impregnated, painted and other tiles absorbable substrates such as sandstone, clinker, facings and silicate brick, roof tiles etc.
For indoor and outdoor use. Impregnation strengthens surface, eliminates dusting, makes it easy to keep the product clean, gently brings color to life.
Note: Do not apply the preparation on non-absorbent or slightly absorbable substrates, as it may this will cause stains on such surfaces.
Surface preparation: The impregnant can be used on dense, clean, dust-free,
stains and exfoliating elements. Stains and eruptions of origin can not occur
biological and chemical (corrosion or salting). When applying the preparation on freshly made
mineral substrates (eg cement plasters, cement-lime plasters) a minimum 2-week period should be maintained seasoning. Impregnation of tiles should be performed after the glue is completely dry, about 3-4 days - depending on the recommendations of glue manufacturer.
Application: Apply the impregnation to the substrate with a sprayer after obtaining a stable stream, cover it evenly the entire surface, avoid stains and puddles. You can also apply the impregnation
with help of a brush or a soft brush. Avoid spray mist, cover shrubs, plants, etc. Plaster tiles are enough to impregnate once, concrete tiles should be covered twice. Each subsequent treatment impregnation should be done using the „wet on wet” method. When using indoors, ensure airing. Wash tools and fresh splashes with water.
Technical data: Basic binder: acrylic and silicone binder. The temperature of use of the environment and the ground
from + 5° C to + 25° C. Layer 1 or 2 volume. Drying time approx. 12 hours. when drying at + 20° C and humidity relative air 65%. In other circumstances, the short-term or longer drying time of the impregnation should be taken into account.
Consumption for 1 layer from 0.15 to 0.2 l / m2
Storage: Store in a tightly closed, original packaging in a cold room,
in a positive temperature. Shelf life is up to 12 months from the date of production stated on
product packaging. Keep away from children.
The maximum VOC content in the product is 5.50 g / l, the permissible VOC content is 130 g / l.
This information is the basic guidelines for the use of the product and does not absolve
from the obligation to carry out work in accordance with the principles of construction and health and safety regulations. Detailed information about the product can be found in its Technical Data Sheet.